Anyang Honesty Technology Co.,Ltd
EXCELLENT QUALITY SINCERE SERVICE
EXCELLENT QUALITY SINCERE SERVICE
|
Product Details:
Payment and Shipping Terms:
|
solid nylon rod is an important engineering plastic, which can replace the wear-resistant parts of mechanical equipment and replace copper and alloys as wear-resistant parts of equipment. It has the characteristics of good toughness, strong wear resistance, oil resistance, shock resistance, tensile strength, good bending strength, low water absorption, good dimensional stability, etc., so it is used to process various wear-resistant high-strength parts. Anyang Honesty Tech, provide Hard anti-uv excellent self lubrication solid nylon rod for customers, it widely used for making gear,whsher,roller and so on.
Excellent bearing properties
High impact strength and toughness
Low power factor requirements
High wear resistance
Very good sliding properties
| TYPICAL PROPERTIES of EXTRUDED NYLONS | ||||
| ASTM or UL
test |
Property |
Nylon
6/6 Unfilled |
Nylatron GS
Moly-Filled 6/6 |
Nylon
6/6 30% Glass |
| PHYSICAL | ||||
| D792 | Density (lb/in³) (g/cm³) | 0.042
1.15 |
0.042
1.16 |
0.049
1.35 |
| D570 | Water Absorption, 24 hrs (%) Saturation (%) | 0.3
7.0 |
0.3
7.0 |
0.7
5.4 |
| MECHANICAL | ||||
| D638 | Tensile Strength (psi) | 11,500 | 12,500 | 27,000 |
| D638 | Tensile Modulus (psi) | 425,000 | 480,000 | 1,400,000 |
| D638 | Tensile Elongation at Break (%) | 50 | 25 | 3 |
| D790 | Flexural Strength (psi) | 15,000 | 17,000 | 39,000 |
| D790 | Flexural Modulus (psi) | 450,000 | 460,000 | 1,200,000 |
| D695 | Compressive Strength (psi) | 12,500 | 16,000 | – |
| D695 | Compressive Modulus (psi) | 420,000 | 420,000 | – |
| D785 | Hardness, Rockwell R | M85 / R115 | M85 / R115 | M101 |
| D256 | IZOD Notched Impact (ft-lb/in) | 0.6 | 0.5 | 2.1 |
| THERMAL | ||||
|
D696 |
Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F) |
5.5 |
4.0 |
1.2 |
| D648 | Heat Deflection Temp (°F / °C) at 264 psi | 200 / 93 | 200 / 93 | 482 / 250 |
| D3418 | Melting Temperature (°F / °C) | 500 / 260 | 500 / 260 | 491 / 255 |
| – | Max Operating Temp (°F / °C) | 210 / 99 | 220 / 104 | 230 / 110 |
|
C177 |
Thermal Conductivity (BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C) |
1.7 5.9 |
1.7 5.9 |
1.7 5.9 |
| UL94 | Flammability Rating | V-2 | V-2 | HB |
| ELECTRICAL | ||||
| D149 | Dielectric Strength (V/mil) short time,
1/8″ thick |
400 | 350 | 530 |
| D150 | Dielectric Constant at 60 Hz | 3.6 | – | 3.5 |
| D150 | Dissipation Factor at 60 Hz | 0.02 | – | 0.02 |
| D257 | Volume Resistivity (ohm-cm) at 73°F,
50% RH |
> 1013 | > 1013 | 1015 |
Honesty Technology nylon rod specifications :
Length:1000mm-3000mm
Diameter:10-800mm
Color:according to customers need
It can be customized according to the specific requirements of customers
solid nylon rod is widely used in turbine, gear, bearing, impeller, crank, instrument panel, drive shaft, valve, blade, screw, high pressure washer, screw, nut, seal ring, shuttle, sleeve, sleeve connector and other mechanical parts of the processing and production.
Anyang Honesty Technology Co.,Ltd
Contact Person:
Mr. Gavin Boa
Tel/Whatsapp:
0086 18568836787
Fax:
0086-372-2580528
Email:
Send your inquiry directly to us